CRYSTAL MODEL SET GPLS2026

These Crystal Model Sets contain different coloured jacks(Red, Black & White) & connectors(long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.

DESSICATOR (PLAIN) GPLS2019

Plain Dessicators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.

DESSICATOR(VACCUM) GPLS2018

Polylab Dessicators are made of Polypropylene and Polycarbonate. The autoclave vaccum desiccators can hold vaccum upto 740mm of Hg for 24hrs. without any greasing.

The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polyproptlene. An internal groove is provided on the flange to hold a silicon rubber O-Ring.

The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vaccum creation, shutting off & vaccum releasing.

 DRAINING BASKET GPLS 2106

As the name suggests, this basket with wide net like structure on all sides prove really useful for draining different laboratory appratus after washing them. Made of polypropylene, this basket can be repeatedly autoclaved.

Materials : Polystyrene

DRAINING RACK GPLS2107

Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.